Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 47 results ...
Abdelgawad, M A M (2011) Hybrid decision support system for risk criticality assessment and risk analysis, Unpublished PhD Thesis, , University of Alberta (Canada).
Al-Bataineh, M T (2008) Scenario-based planning for tunnelling construction, Unpublished PhD Thesis, , University of Alberta (Canada).
Allouche, E N (2001) A decision-support model for selection of a trenchless construction method, Unpublished PhD Thesis, , University of Alberta (Canada).
Alvanchi, A (2011) Incorporating the effects of complex dynamic interactions in the construction decision making process, Unpublished PhD Thesis, , University of Alberta (Canada).
Awad, A L S (2012) Intelligent contractor default prediction model for surety bonding in the construction industry, Unpublished PhD Thesis, , University of Alberta.
Azimi, R (2011) An integrated real-time control system for structural steel fabrication projects, Unpublished PhD Thesis, , University of Alberta (Canada).
Chehayeb, N N (1996) Simulation-based project control, Unpublished PhD Thesis, , University of Alberta (Canada).
Corona Suarez, G A (2007) Simulation-aided framework for assessing the effect of project quality management on construction performance, Unpublished PhD Thesis, , University of Alberta (Canada).
Dissanayake, G M (2006) An integrated computational intelligence framework for construction performance diagnosis, Unpublished PhD Thesis, , University of Alberta (Canada).
Ekyalimpa, R (2015) A distributed simulation approach for contractor company performance management in the construction industry, Unpublished PhD Thesis, , University of Alberta.
El Ghandour, W (2007) Integrated information-based construction simulation system, Unpublished PhD Thesis, , University of Alberta (Canada).
Elbarkouky, M M G (2010) A fuzzy consensus building framework for early alignment of construction project teams on the extent of their roles and responsibilities, Unpublished PhD Thesis, , University of Alberta (Canada).
ElNimr, A A (2011) Enhancing space modeling and mobile resources planning in construction operations through a simulation driven visualization framework, Unpublished PhD Thesis, , University of Alberta (Canada).
Fan, H (2007) Leveraging operational data for intelligent decision support in construction equipment management, Unpublished PhD Thesis, , University of Alberta (Canada).
Hajjar, D (1999) A unified modeling methodology for simulation-based planning of construction projects, Unpublished PhD Thesis, , University of Alberta (Canada).
Hasan, M S (2013) Decision support system for crane selection and location optimization on construction sites, Unpublished PhD Thesis, , University of Alberta (Canada).
Inyang, N I (2013) A framework for ergonomic assessment of residential construction tasks, Unpublished PhD Thesis, , University of Alberta (Canada).
- Type: Thesis
- Keywords: construction activities; disability; residential; collaboration; compliance; fatigue; material handling; productivity; builder; ergonomics; experiment; weather; case studies; simulation
- ISBN/ISSN:
- URL: https://www.proquest.com/docview/1318837649
- Abstract:
Residential construction activities are predominantly physical in nature and are usually executed in uncomfortable environments at a fast pace. Workers in this industry require physical stamina as daily tasks often require prolonged standing, bending, stooping, material handling, working in crowded spaces and sometimes exposure to adverse weather conditions. This places varying amounts of stress on the musculoskeletal system (muscles, tendons, ligaments and bones) of the worker and increases the potential risk of work-related musculoskeletal disorders (WRMSDs) which may in time deteriorate into permanent disability and, consequently, loss of ability to work. Applicable strategies are required to identify and control or eliminate the potential for development of WRMSDs by controlling or eliminating causal risk factors. The goal of this research is to develop a framework for ergonomic assessment of residential construction tasks. This goal is realized through the development of three ergonomic assessment models: (i) an observation-based assessment model ( ErgoCheck), (ii) a biomechanical assessment model (ErgoBioMCheck ), and (iii) a discrete event-simulation-based assessment model application (ErgoSymulate). A fatigue-productivity relationship model has also been developed as part of this study. Five (5) case studies are presented based on an assessment of factory-based residential construction wall and floor panel framing processes conducted in collaboration with an Alberta-based home builder. These case studies are used to assess the applicability and validity of the developed models. The results have shown acceptable correlation with existing models and compliance with evidence and theories found within ergonomics and construction literature. Further experimental and quantitative validation is recommended.
Langevine, R (2006) A decision support system for the maintenance management of buildings, Unpublished PhD Thesis, , University of Alberta (Canada).
Liu, J (2018) Dual-level resource-constrained multi-project scheduling framework for prefabrication in construction, Unpublished PhD Thesis, , University of Alberta.
Lu, M (2000) Productivity studies using advanced ANN models, Unpublished PhD Thesis, , University of Alberta (Canada).
Mah, D E (2011) Framework for rating the sustainability of the residential construction practice, Unpublished PhD Thesis, , University of Alberta (Canada).
Manavazhi, M R (1998) A configuration-based modeling methodology for the automated generation of simulation models in construction, Unpublished PhD Thesis, , University of Alberta (Canada).
Mao, X (2008) The framework of TRIZ-enhanced-value engineering analysis and its knowledge management, Unpublished PhD Thesis, , University of Alberta (Canada).
Moghadam, M (2014) Lean-mod: An approach to modular construction manufacturing production efficiency improvement, Unpublished PhD Thesis, , University of Alberta (Canada).
Moghani, E (2013) A simulation-based framework for as-built documentation of construction process and product information, Unpublished PhD Thesis, , University of Alberta (Canada).
Mogollon, J D M (2009) Automation of design and drafting for wood frame structures and construction waste minimization, Unpublished PhD Thesis, , University of Alberta (Canada).
Mohamed, Y (2002) A framework for systematic improvement of construction systems, Unpublished PhD Thesis, , University of Alberta.
Nassar, N K (2005) An integrated framework for evaluation, forecasting and optimization of performance of construction projects, Unpublished PhD Thesis, , University of Alberta (Canada).
Olearczyk, J (2010) Crane lifting operation planning and lifted object spatial trajectory analysis, Unpublished PhD Thesis, , University of Alberta (Canada).
Pereira, E S S (2017) A framework for assessing the safety performance of industrial projects using safety-related measures, Unpublished PhD Thesis, , University of Alberta.
Saba, F (2012) A semantic-driven framework for facilitating reusability and interoperability of construction simulation modeling, Unpublished PhD Thesis, , University of Alberta (Canada).
Salem, O M (1999) Infrastructure construction and rehabilitation: Risk-based life cycle cost analysis, Unpublished PhD Thesis, , University of Alberta (Canada).
Shaheen, A A-H I (2005) A framework for integrating fuzzy set theory and discrete event simulation in construction engineering, Unpublished PhD Thesis, , University of Alberta (Canada).
Shahin, A A (2007) A framework for cold weather construction simulation, Unpublished PhD Thesis, , University of Alberta (Canada).
Sharma, V (2010) Asset levels of service-based decision support system for municipal infrastructure investment, Unpublished PhD Thesis, , University of Alberta (Canada).
Siu, M F (2016) Development of quantitative methods for project scheduling and workface planning under time-dependent resource constraints, Unpublished PhD Thesis, , University of Alberta.
Soleimanifar, M (2016) Integrated project management framework for a pipe spool fabrication shop, Unpublished PhD Thesis, , University of Alberta.
Song, L (2004) Productivity modeling for steel fabrication projects, Unpublished PhD Thesis, , University of Alberta (Canada).
Taghaddos, H (2010) Developing a generic resource allocation framework for construction simulation, Unpublished PhD Thesis, , University of Alberta (Canada).
Van Tol, A A (2005) Agent embedded simulation modeling framework for construction engineering and management applications, Unpublished PhD Thesis, , University of Alberta (Canada).
Wang, P (2006) Production-based large scale construction simulation modeling, Unpublished PhD Thesis, , University of Alberta (Canada).
Xie, H (2011) Improving dynamic project control in tunnel construction, Unpublished PhD Thesis, , University of Alberta (Canada).
Xie, H (2012) Improving dynamic project control in tunnel construction, Unpublished PhD Thesis, , University of Alberta.
Xu, J (2001) CAD-based integrated simulation environment (CAD-ise), Unpublished PhD Thesis, , University of Alberta (Canada).
Younes, B (2013) A framework for invoice management in construction, Unpublished PhD Thesis, , University of Alberta (Canada).
Yu, H (2010) An integrated approach toward lean for production homebuilders, Unpublished PhD Thesis, , University of Alberta (Canada).
Zhang, X (2006) Toward innovative and efficient infrastructure delivery, Unpublished PhD Thesis, , University of Alberta (Canada).